This feature saves the user from dialing an additional Access Code. The incoming call is either distributed to the agent that has been idle the longest or in accordance with a programmed preference level. Use Handsfree Answerback or lift the handset, and talk with the called party. When an Attendant is not available, station users may respond to the external ring and answer incoming calls. Handset and Speaker Volume Press up and down volume keys during a call to adjust the handset or speaker volume.
Restore the handset or press To verify Call Forward —. Other stations cannot enter an Unsupervised Conference. Transferred calls can be voice announced, camped-on when the station is busy , or directly transferred to ring at stations. We guarantee that service and support is never overlooked after the sale. When 80 system speed dial buffers are allowed, each station user also has 20 station speed dial buffers. F - 10 Flexible Numbering Plan. The station user can still hear the outside or intercom voice.
System Software S5000 or higher is required. Users can also press the Redial key to redial the last outside number dialed. To access the feature: Lift the handset, and wait for internal dial tone. . When any party hangs up, the conference still includes the remaining parties. The maximum message lasts 90 seconds. The call can be retrieved from System Call Park at any station in the system.
A Multiline Terminal user on hold cannot enter another conference. . System Software S4500 or lower supports 10 Feature Access Keys. Use Memory Block 1-1-70 Code Restriction Class Assignment when Lockout is Set to change system-wide to a different Code Restriction Class. H-7 Hold With Recall Exclusive and Non-Exclusive. General: Relay make times are flexible.
A Station user can dial a system number and a station number open numbering or dial the station number only closed numbering to access any station. Restrictions: ¥ The maximum time for any message is 90 seconds. This manual covers through Release 25 software. The connection does not require an external relay system. Dial Pad 0~9 is valid for searching. ¥ example: Station Speed Dial stored hookflash + 110. When both stations are idle, the system signals the Automatic Callback originator first and, after the originator answers, signals the other station.
A 3-party conference is established. System software S5000 or higher is required. Individual device conditions and operating procedures are provided ¥. Dial optional step, toggles call between voice and tone. This guide provides information for using the Tenant Resale Module. You can use Program 4-11 to turn this feature off and on per port Item 2 to turn ringing on and off use program 4-01 for Day and 4-02 for night.
Quick reference card provides the basic instructions for accessing the messaging system by phone or by computer. . Service Conditions — specifies conditions that apply to the feature operation. Dial the Station Speed Dial Program Access Code default: Dial the Station Speed Dial buffer number to be programmed Dial the Trunk or Trunk Group Access Code maximum four digits. Dial the desired Feature Access Code or station number. Press the flashing Call Appearance key to retrieve the call.
C-61 C-17 Class of Service. Hello, I've been working on this switch for a little bit now and I can't figure out which memory location to change for a couple things. Restrictions: A Single Line Telephone cannot be used for Trunk-to-Trunk Transfer. Using System Software S4500 or lower, the incoming call is ¥. The system allows the installation of most interface circuit boards in any interface slot. System Software S3000 or higher is required to display Japanese or Spanish.
Repeat to add an additional party. An external microphone is also provided that has a push-to-mute control button that must be held down to turn the microphone off. This allows the station user to put the current call on hold to answer a second call to increase call handling abilities. Wait for confirmation tone, and hang up. System Software S4000 or higher is required.
Enter the 2-digit buffer number 01~20. Help Topics This options provides a list of help topics. Dial the Call Park location number of the call to be retrieved. Single Line Telephone user goes on-hook at this time, the call is automatically connected to the Multiline Terminal. This manual covers through Release 24 software. Dial the Call Park Retrieve Access Code set as default.