Look at the color bars in the middle of the page. After setting up the product, it does not printTry the following solutions to resolve the issue. Standard phone company charges apply. The product automatically begins printing all theunprinted faxes from memory. Slide stack of paper forward until it stops.
Depending on your software application, this button might be called Properties,Options, Printer Setup, Printer, or Preferences. If you haveBackup Fax Reception enabled, the product might have stored the fax in memoryupon reception. Quit all applications running on your computer. If this did not solve the issue, try the next solution. In the Print Settings area, click Printer Toolbox.
If more than one printer is found on the network, the Printers Found screen appears. They should snap down into place. Select the appropriate check boxes to remove the unnecessary components. Click the button that opens the Properties dialog box. If this does not work, retake thephotos with your digital camera. If this did not solve the issue, try the next solution.
Cause:The output tray was not inserted all the way. If you found your network name and selected it, go on to step 6. If the quality of the printout is poor, clean the glass. Press Start Fax and wait for tone. The product and computer were not communicating with each other. To check if your phone line is digital, connect aregular analog phone to the line and listen for a dial tone.
Fax tones are recorded on my answering machineTry the following solutions to resolve the issue. Quit all applications running on your computer. If the print job does not stop, press Cancel again. Afterward, tell the wizard how you wish the home computer to interact with the printer. Solutions are listed in order, with the mostlikely solution first. Make sure the output is lowered all the way and lays flat.
If you do not hear a dialtone, call your local telephone company for service. Solve a problemTo reinstall the printhead1. View the animation for this topic. To clean the printhead from the control panel1. Follow the prompts on the display. View the animation for this topic. If the first solution does not solve the problem, continue trying theremaining solutions until the issue is resolved.
Theseprograms activate some of the computer utilities, such as the anti-virussoftware, but are not required for the computer to function. Cause: An error condition was preventing the product from receiving faxes andBackup Fax Reception was set to Off. . Load full-size paper in the main input tray. Printing cannot occur without one of each type of ink cartridge inserted into the correctslot.
Match color icons, then slide cartridge into slot until it clicks into place. Solve a problemCause: The product was set up to receive faxes manually, which means that theproduct would not answer incoming calls. Make sure the product is the selected printer. Cause: The flaps might get caught in the rollers. If the previous steps did not resolve the problem, try to determine which ink cartridgeis causing the problem and replace it. Cause: The memory card file system was corrupted. Remove any staples or clips from the original document.
Close the ink cartridge door. Remove all of the ink cartridges and place them on a piece of paper with the inkopening pointing up. For more information, see:Check the estimated ink levelsCause: The ink cartridges might have insufficient ink. Do one of the following:1-sided original to 1-sided copya. The product automatically begins printing all theunprinted faxes from memory.