The Ply Exploder window appears. I want to startlearning that too. It should appear as shown. Notice the ply has not contour definition. This new feature enables to define precisely which continuity should be applied on sections and guides thus increasing the quality of the Loft. These revisions will be available as new issues of the manual. This is typically not how you will want them to be ordered.
You may have to stretch out the column to read it. You can choose this plane either before or after you select the Sketcher icon. It's easy to and it's free. The second portion of the book will delve into the manufacturing side of composite parts and how they will be created. Specifies the zones that will be referenced in the stack up Browse button Specifies where the file will be saved Open stack-up file.
Save and close both documents. Select the Browse icon for the Stack up file and go to a location in your area. The purchase of this manual does not constitute any right to future updates of the manual. The order of the plies under the Stacking branch determines the order that they will stacked on the definition surface. Notice the laminate definition is defined. The plies created here will represent the actual plies that will be necessary in order to build the composite part. The Zone Definition window appears.
It should appear as shown. The Move Selection window appears. With V5R21 provides efficient tools to validate the shape quality thus improving the Quality of the produced surfaces. Notice the plies are contained within a plies group. Name the file Stack Up and select Open.
Notice nothing has been defined. The core sampling file displays the location of the core sampling itself for each zone. These will be discussed in more detail later on. This completes the feature set alignment of V5R19, V5R21, and V6R2012. This provides a way to look at the way the plies will be created before actually creating them.
Open the Importing a Laminate model. The Ply Definition window appears. You will have to use the Ctrl key. Key in 24 for the Line in the Move Selection window. This will make it easier to select the wireframe elements later on in this exercise. It adds material along a guide curve. Open the Plies Creation document.
The Stack Up file should appear as shown. This command adds material in the third direction, a direction other than the sketch. You can place your order by credit card. Axis 0,0 120 30 6. Thank you for your interest in our training material. Two new branches appear in the specification tree. Notice the ply highlights in the display.
Thanks to a dedicated modeling environment which improves the user efficiency and workflow by embedding an adapted user interface. Select the Stack Up from Zones icon. Go to your area and open both the Core Sample file and the Stack Up file. This tutorial contains Basic Catia modules sketcher, part, assemblies, drafting. All of the preliminary design has already been done on this model. I cannot receive registered post or C. Finally, the grid method will be discussed in the Composite Grid Design workbench.