By pressing the button, you can display only the Live View image. I still accept donations to maintain this Camera Manual Library at the link above. I only link well known and reputable sellers. To see the resulting effects, take test shots. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center. Autofocusing during movie shooting may momentarily throw the focus far off or change the exposure.
If stray light enters the viewfinder when the picture is taken, it may throw off the exposure. A card-related error is displayed p. The new file name will be registered and the screen in step 2 will reappear. Doing so may cause fire or a health hazard. Use to move the magnifying frame to the position where you want to focus. The last captured image or last image viewed will appear. Realizing those kinds of measurements, it is definitely going to be fit in your hand.
It is just 152 millimetres length x 116. Adjust the slow motion speed by turning the dial. Set the number of copies. It will return to normal at room temperature. The body is light for full frame camera. The Custom Controls screen will appear.
After recharging the battery, detach it and disconnect the charger from the power outlet. The paper type screen will appear. Set ratings with the Button Select an image or movie. Press the button to lock the exposure, then recompose and take the shot. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available exposure meter. Each color can be corrected to one of nine levels.
When the card is formatted, all images and data in the card will be erased. You can then compose the shot as if you were shooting with a medium- or large-format camera 6x6 cm, 4x5 inch, etc. When the function selection ends or if you press the shutter button halfway, the camera will be ready to shoot. The first four alphanumeric characters are set upon factory shipment and unique to the camera. After entering all the digits, turn the. The image transfer is a function of the Eye-Fi card. To quit the slide show and return to the setting screen, press the.
If the light source within the image changes, the screen may flicker. Select your geographic area, country and language. Index Multiple thumbnail images are printed on one sheet. Set as desired, then press. Turn the or dial to change the setting. Select the registered file name. The overall body is 152 mm x 113.
So, for you who want to take reference about this product, just refer to the following video. The Quick Control screen will appear 7. When the copying is completed, the result will be displayed. The metering is weighted at the center covering approx. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. And if you think it is more than informative, we would like to ask you in sharing this information in your page. The original of the selected image will remain intact.
High-speed sync is also possible. When flash was used, the bottom part of the picture came out unnaturally dark. Displaying Shooting Settings After you press the button a number of times, the shooting settings will be displayed. Detecting whether the subject is still or moving, it also adjusts focus automatically. Press the button to save the adjusted parameters. To scroll, hold down the.
Total images selected Turn the dial to select an image to be copied, then press. Turn the dial to select the icon of the case you want to adjust. It is mainly used during movie editing. Write the serial number displayed on the battery history screen on a commercially-available label approx. Main Dial 1 After pressing a button, turn the dial. Exposure Compensation Setting Guide for Multiple Exposures Two exposures: -1 stop, three exposures: -1.
We hope that this manual will be useful for you in understanding this Canon camera product. Two images will be displayed. You can then adjust the printing effect. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. If you do not need to set any printing effects, go to step 5. During movie shooting, do not point the lens toward the sun. Recharge the battery on the day before or on the day it is to be used.